Cascade wall

Natural soft billowing wall light with hand finished brass arm and hand-turned wooden details


Designed by: Daniel Fosbery 

A gorgeous contemporary wall light, soft and stylish, which is perfect for interiors that focus on natural materials and understated elegance. The shade is made to order and designed so that it can be removed and washed seperately. The ability for the shade to be washed makes it a perfect wall light for kitchens where airbourne grease and oils mean lampshades aren't normally able to be used.

1 x 9 watt SES lamp, mains dimming
Bulb not supplied


With many of our customers looking for lampshades for busy restaurants and hotels, we understand that shades in high traffic areas can get damaged due to a build up of grease and dirt. Traditional lampshades are difficult to clean, so we've developed an innovative solution - fabric shades that are removable and machine washable.


What is the Trade Portal?
The Trade Portal is a facility on the website only available to members of the interiors and building trade, that allows approved accounts to add any item on the website to their shopping cart and receive their trade discount. 

Is it easy to use?
Yes, very. We are all familiar with saving our details on websites like Amazon and Ebay, once you login with your email and password the website will unlock the Trade Portal extras and change the site slightly to make sure you know you have logged in succesfully. Then you can add products and request swatches as normal with every item discounted and itemised in the shopping cart.

How long does it take to register?
No more than 5 minutes, we ask for some basic information and provided you have a website in the correct market and an email address that links to it the account will be approved in a matter of hours.
You would then be emailed a confirmation the account is approved and then you can continue shopping.

How do I register?
Easy, follow the link or go the the "Trade" section on the website menu and fill in the form for Trade Portal applications.



These lights are available as standard (IP20) and are able to be used in the areas shown as "outside zones!.

Or you can request these to be wired as IP44 in the wiring options on this page. 

Zone 0 is inside the bath or shower itself. Any fitting used in this zone must be low voltage, (max 12v) and be rated at least IP67 which is total immersion proof.

Zone 1 is the area above the bath or shower to a height of 2.25m from the floor. In this zone a minimum rating of IP45 is required but it is generally accepted that IP65 is to be used. It's also worth noting that most shower lights are rated at IP65 in any case.

Zone 2 is an area stretching 0.6m outside the perimeter of the bath and to a height of 2.25m from the floor. In this zone an IP rating of at least IP44 is required. In addition it is good practice to consider the area around a wash basin, within a 60cm radius of any tap to be considered as zone 2.

Outside Zones are anywhere outside zones 0,1 and 2 (subject to specific limits) and where no water jet is likely to be used. There are no special IP requirements in this zone, however we suggest that you consider a light with an IP rating of at least IP20+.

In addition to the above, if there is a likelihood of water jets being used for cleaning purpose then a fitting rated with a minimum of IP65 must be used. Full details can be found in the latest copy of the IEE wiring regulations.



We can make and deliver within 3 weeks, however, our work-load can fluctuate at certain parts of the year, with September - November being our busiest. If you require an accurate date please call or email us.  

In the unlikely event of receiving damaged or missing goods, please refer to our terms and condtions for information on how to register the issue and receive your replacements.





Cascade drop








Seville Solo