Oblique (Gold) Linen Drum

Bright block-printed linen cylindrical lampshade with yellow chevron pattern

£69.00

Quantity:
CHECKOUT

Fabric swatchREQUEST SWATCH

DESCRIPTION

Oblique (Gold) Linen Drum printed linen lampshade in Copper & Silk's Cylinder Drum shape, covered with fabric designed by Copper & Silk, inspired by traditional Indian block-printing techniques.

Finishes
Printed linen, with Cream Card lining

DIMENSIONS

Dimensions in inches
8" x 8" x 6"
10” x 10” x 6”
12” x 12” x 7”
14" x 14" x 9"
16” x 16” x 10”
18” x 18” x 11”
20” x 20” x 11”
22” x 22” x 12”

Dimensions in millimetres
208mm x 208mm x 150mm
250mm x 250mm x 150mm
300mm x 300mm x 175mm
350mm x 350mm x 225mm
400mm x 400mm x 250mm
450mm x 450mm x 275mm
500mm x 500mm x 275mm
550mm x 550mm x 300mm

Dimensions are presented as base x top x slope

Need help?
When we measure lampshades, we take the measurements in a very specific order, it is a tradition that is too engrained in us to change. So to help measure your lampshade or better understand the size of ours here is a simple diagram to illustrate.

 lampshade measuring guide

The first dimension is always the base of the shade so when a shade is referred to as a "12 inch shade" this is the base size.
If you still need help please call us on 0207 8459 8772

Save

Save

FITTING GUIDE

This is probably the most important part to get right when ordering a lampshade. If the wrong fitting is ordered then it will not work on your lampbase. Because of this we have a simple guide below to help. If you are still not sure, give us a call on 020 8459 8772 Monday to Friday 9am - 5pm.

BASE E27 GIMBAL
will be provided with a reducer to suit the smaller E14 and Bayonet cap bulbs

This is one of the most common types of fitting. The gimbal (large washer in the centre) is set 1.5" (38-40mm) inside the shade and will hide the lampholder from view. Anything below the lampholder will remain visible, so be careful to check this is right for you.

 

PENDANT E27 GIMBAL
will be provided with a reducer to suit the smaller E14 and Bayonet cap bulbs

This is exactly the same fitting as the Base E27 gimbal but is fixed to the top of the shade to be hung as a pendant just like the drawing above.

 

 

 AMERICAN FINIAL FITTING
 To work with American lights or our Adjustable carriers only

The central washer is fixed to the top of the shade and needs either Copper & Silk's adjustable carrier or an American lampbase with the harp and finial (the wire part that supports the shade) which is then secured as per the above picture.

 

Save

Save

DELIVERY & RETURNS

Delivery
This lampshade will be made and delivered to you within 1 week. These shades are made to order to the size you request and with the fitting you need. Please check which fitting is best for you by reviewing the fitting guide.

Returns
We want you to be happy with your selection which is why we offer samples of fabrics and advice on the phone or the website. Unfortunately, as these are made to your individual requirements, we are unable to accept returns or offer refunds if you are not happy with the design, colour or size. For all details, please consult our terms and conditions.