Compact posable light with large rounded detailing
3D visual for reference only
Designed by: Daniel Fosbery
A small versatile light that is posable in two directions. Perfect for bedside reading, used as a picture light or on sloped ceilings or mounted onto joists. The detailing is large round with generous use of material to create a strong outline with tactile a tactile appearence.
1 x 9 watt Gu10 spot lamp, mains dimming
Bulb not supplied
What is the Trade Portal?
The Trade Portal is a facility on the website only available to members of the interiors and building trade, that allows approved accounts to add any item on the website to their shopping cart and receive their trade discount.
Is it easy to use?
Yes, very. We are all familiar with saving our details on websites like Amazon and Ebay, once you login with your email and password the website will unlock the Trade Portal extras and change the site slightly to make sure you know you have logged in succesfully. Then you can add products and request swatches as normal with every item discounted and itemised in the shopping cart.
How long does it take to register?
No more than 5 minutes, we ask for some basic information and provided you have a website in the correct market and an email address that links to it the account will be approved in a matter of hours.
You would then be emailed a confirmation the account is approved and then you can continue shopping.
How do I register?
Easy, follow the link or go the the "Trade" section on the website menu and fill in the form for Trade Portal applications.
As these lights are rated IP20, they are suitable for use in the bathroom outside of zones, see diagram below.
Zone 0 is inside the bath or shower itself. Any fitting used in this zone must be low voltage, (max 12v) and be rated at least IP67 which is total immersion proof.
Zone 1 is the area above the bath or shower to a height of 2.25m from the floor. In this zone a minimum rating of IP45 is required but it is generally accepted that IP65 is to be used. It's also worth noting that most shower lights are rated at IP65 in any case.
Zone 2 is an area stretching 0.6m outside the perimeter of the bath and to a height of 2.25m from the floor. In this zone an IP rating of at least IP44 is required. In addition it is good practice to consider the area around a wash basin, within a 60cm radius of any tap to be considered as zone 2.
Outside Zones are anywhere outside zones 0,1 and 2 (subject to specific limits) and where no water jet is likely to be used. There are no special IP requirements in this zone, however we suggest that you consider a light with an IP rating of at least IP20+.
In addition to the above, if there is a likelihood of water jets being used for cleaning purpose then a fitting rated with a minimum of IP65 must be used. Full details can be found in the latest copy of the IEE wiring regulations.
We can make and deliver within 3 weeks, however, our work-load can fluctuate at certain parts of the year, with September - November being our busiest. If you require an accurate date please call or email us.
In the unlikely event of receiving damaged or missing goods, please refer to our terms and condtions for information on how to register the issue and receive your replacements.
TERMS & CONDITIONS